In this article we’re going to examine how to make your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and tricks which you can use.

For those who have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the home, you need to get them some particular dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the set-up which will look a little scary at first, but it is actually quite simple. All you have to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so that you get something that looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so that you can make certain that nothing will leak once you put the mask on. Be sure the edges are cut so the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making sure that it runs smoothly and evenly across the whole mask. You will want to http://wa.nlcs.gov.bt/?p=18444 start with one side of the mask , so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs across the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to remove it later, and it will leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you are done, so you don’t wind up with smudges or smears on your dog.

Then it is time to paste the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the foundation of the mask and fold it over. Be certain it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the procedure on the cardboard folds till you’ve got the mask snugged securely onto the face of your dog. Don’t make the folds too large or else it might look messy. As soon as you’ve completed this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Make certain the ears are flat and be certain it is not too short or long as this can cause some problems with the mask slipping off the dog’s face.

If you are using a dog mask as your dog protection, you will need to do some sanding to make sure that it’s secure on your dog. You can do this by sanding off any excess paper that may have been eliminated from your mask.

Recommended Posts

No comment yet, add your voice below!


Add a Comment

Your email address will not be published. Required fields are marked *